Single-use Face Mask - 10st

Masques chirurgicaux - 10st

Single-use Face Mask, CE certified and compliant with EN14683:2005 Type II

Product specification

  • Réf. DIGAMask-10
  • Indication Covid19
  • Marque DIGAMED
  • Ne contient pas de Pas d'info
  • Allergènes (contient) Pas d'info
Besoin d'aide? Appelez-nous: +32 15 24 30 10 ou +31 467 078 104
9,95 €

Délai: 1 jour ouvrable

Informations produit


1. The mask consists of three layers of non-woven fabric, the outer layer is white polypropylene spunbond non-woven fabric, the middle layer is polypropylene meltblown non-woven fabric with bacteria and particle filtering effect, and the inner layer is white polypropylene spunbond non-woven fabric.

2. The masks are suitable for wearing in an ordinary medical environment, blocking the exhalation or spraying of pollutants from the oral or nasal cavities. Used in non-invasive operation, bacterial filtration efficiency is over 98%.

3. Disposable single-use face mask products are CE certified and comply with EN 14683:2005 Type II.

Product specifications

1. Mask length:175 mm;Mask width:165 mm,three stacks in the middle, the width of the mask after stacked is 95 mm,and the width of each stack ≥ 10 mm. The nose-clip side as the upper part and the dark color as the outer side. After opening the stack, the opening side should face down;

2. The width of the pressing edge ≤ 10 mm, and the upper nose-clip ≤ 16 mm; for the nose-clip, length = 80 mm.

3. For ear-loop, length is 180 mm and diameter is 3 mm. The material is polyester spandex. The inner layer is welded and the distance from the mask edge is not more than 10 mm.

Sterilization type  Non-sterile
Usage 1. Flatten the mask and hang both sides of the mask on your
  2. Fix the nose-clip in the shape of the nose to prevent dirty air
  from entering;
  3. Pull the mask to the lower jaw so as to produce a good
  protective effect.
Special storage conditions and methods Store in a relative humidity not exceeding 80%, non-corrosive gas, in a wellventilated room and avoiding high temperatures.